VAYU2-4G (LTE,CAT4,America) w/ GPS
VAYU2-4G (LTE,CAT4,America) w/ GPS
$220.00
You may consider the New Global version instead VAYU2-4G (LTE,CAT4,Global)
Ships in 4-6 weeks (Currently expecting a longer shipping time, please email before ordering)
Prices mentioned here are for Evaluation Units
Contact sales@yantrr.com for volume pricing.
Antennas are not included in the price and must be purchased separately as accessories. Recommended Quad Band GSM Antenna (2x), GPS Antenna (1x)
4G/LTE, CAT4 150/50 Mbps, Built-in GPS, 2x Serial I/O
This new VAYU2-4GEC25-A cape provides 4G/LTE,CAT4 connectivity for data communication in America. It meets the ever increasing data throughput requirements in M2M sector, specifically for video, voice-over-IP, and high speed realtime logging applications. The cape includes an integrated GPS/GLONASS receiver for precise location.
- WCDMA: B2/B4/B5, FDD-LTE: B2/B4/B12 bands covering regions/carriers of Asia, Europe, Middle East (please check supported bands with your carrier)
- GPRS, EDGE, 3G/HSPA+, 4G/LTE connectivity
- Up to 150 Mbps (DL)/ 50 Mbps (UL) speed in LTE FDD mode
- Integrated GPS capability provides standard compliant NMEA based geolocation using GPS/GLONASS systems
- SMS Send/Receive
- Push-Push MicroSIM card connector
- Main and Diversity antennas for enhanced connectivity
- Stackable BeagleBone header to mount other capes
- This 4G module is FCC/IC/PTCRB/Rogers/AT&T certified
The cape communicates with Beaglebone over HS USB , utilising its USB host port. To compensate for this used USB port on Beaglebone, we have provided an USB host port on our cape for connecting user devices. The cape is shipped with a mini USB-B to USB-A cable for connectivity to BeagleBone system, while it is mounted on standard BeagleBone header.
We provide full software support for VAYU2-4GEC25-A which includes kernel modules with drivers, device tree overlays and sample wvdial files.
As an added value for M2M applications, 2x utility UART ports with a robust +/- 15KV ESD protection and +/- 25V receiver voltage tolerance are provided on these capes to overcome the standard BeagleBone UART’s 3.3V level limitation. Standard 3-pin JST connectors are used to connect to UART signals.
| SIM Card | 1.8V/3V 6 pin Micro USIM |
| LEDs | Power LED for Modem and GPS module, Netlight/signal LED, GPS Fix LED |
| Control Interfaces | Power on_off and Hard reset for modem and Reset for GPS over GPIOs and push button switches |
| Antenna | SMA Connectors for GSM and GPS antennas |
| Cape ID | Dedicated onboard EEPROM with 2pos Dip switch |
| Certifications/Approvals | RoHS Compliant CE/GCF/Vodafone* (Europe) FCC/PTCRB/AT&T*/Verizon* (North America) RCM/Telstra* (Australia) JATE/TELEC/DOCOMO*/Softbank* (Japan) NCC (Taiwan) KC/SKT/KT*/LGU+* (Korea) IC/Rogers (Canada) NBTC (Thailand) Anatel* (Brazil) |
| Device Type | 4G module |
| Chip | N/A |
| Network | GSM/GPRS/EDGE/WCDMA/HSPA+/LTE |
| Frequency Band | LTE FDD: B2/B4/B12 WCDMA: B2/B4/B5 |
| Data Rate (DL / UL) | LTE FDD: Max 150Mbps (DL) Max 50Mbps (UL) LTE TDD: Max 130Mbps (DL) Max 35Mbps (UL) DC-HSPA+ Max 42Mbps (DL) Max 5.76Mbps (UL) UMTS Max 384Kbps (DL) Max 384Kbps (UL) TD-SCDMA Max 4.2Mbps (DL) Max 2.2Mbps (UL) EDGE Max 236.8Kbps (DL) Max 236.8Kbps (UL) GPRS Max 85.6Kbps (DL) Max 85.6Kbps (UL) |
| Voltage | 3.3 ~ 4.3V, 3.8V typ. |
| Audio | Digital Audio through PCM Interface |
| Connection Interface | Point to point protocol -PPP |
| Software Features | AT command set, USSD, SMS |
| Operating Temperature range | -40 °C ~ +85 °C |
| Receiver | Qualcomm® IZat™ location technology Gen8C Lite (GPS, GLONASS, BeiDou, Galileo and QZSS). |
| Message Format | NMEA0183 Ver. 3.01 ASCII, as well as proprietary message |
| OS Distribution Support | Debian Jessie, Angstrom Linux, Ubuntu, Android – as Kernel module or Pre compiled image with cape configured |
| Driver Support | Linux device tree overlay files for GPS serial port, USB drivers for 4G module, |
| Middleware | GPS (nmead), 3G/4G (wvdial/ppp,qmi) |
